|
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
gadgie
Joined: April 15th, 2011, 8:54 pm
Posts: 712
Location: Fife
|
 New Wiper Blades I bought some new rubber blades for the wipers, but cant get the old ones off? 
Got the wiper unit off no bother, but cant get the rubber to slide out, without damage to the unit?
|
| June 17th, 2012, 6:14 pm |
|
|
|
heinkeljb
Joined: September 30th, 2006, 10:12 pm
Posts: 1180
Location: East Sussex
|
Re: New Wiper Blades As a quick fix for your problem, just buy a couple of new wiper blade from your local motor factor . Then you will have more time to figure out how to replace the rubber on your original ones.
Possibly there are a couple of metal strips which are held in place by clips on either side and the rubber is held in place by cut outs on the metal strips. So you have to remove the metal strips first.
John
|
| June 17th, 2012, 6:59 pm |
|
|
|
gadgie
Joined: April 15th, 2011, 8:54 pm
Posts: 712
Location: Fife
|
Re: New Wiper Blades Cheers for that, but I figured it out, the blades that were on were not the type for sliding the rubbers out of?
So I prized open the top grip, then nipped it closed, after fitting the new blade, works a treat now 
Will have to buy the full thing next time though.
|
| June 18th, 2012, 8:54 pm |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
